Parking | AFW Miami

Park-It® car stops are constructed of 100% recycled rubber and used in parking lots to effectively stop cars pulling into parking spots. Unlike asphalt or concrete, which necessitate frequent replacements, Park-It® parking curbs are more forgiving of vehicles, sturdier, and do not break or need to be replaced. Park-It® car stops include in-molded, highly reflective tape in yellow or white, to ensure visibility and pedestrian safety. The recycled rubber stops are pre-drilled with holes. The flexible rubber design conforms to the contour of uneven road surfaces. ADA Handicap Park-It® is designed specifically for handicap parking spaces. The blue and white contrasting colors are immediately identifiable to differentiate handicap parking spaces to vehicles and pedestrians.

Product Summary

Parking stop is made with corrosion resistant recycled rubber for long lasting durability and dependability
Will not chip, crack, fade, crumble, rot or deteriorate. Resists tire scuffing.
Resistant to damage from ultraviolet light and precipitation including ice, road salt, gas and oil. Does not change with extreme weather swings.
Molded highway reflective tape makes curb highly visible at night
Flex slightly to conform to the contour of uneven surfaces and gravel
Made of 100% recycled rubber making it 1/10th the weight of concrete curbs
Long lasting and cost efficient
Resistant to ultraviolet light, moisture, oil, and extreme temperatures
No painting or maintenance needed
ADA Handicap complaint Blue parking stop
Available in 3', 4', and 6' lengths

Product Information

Easy Rider Speed Bump

Product Information

Easy Rider® 6 ft speed bump, model GNRS2611YB reduces vehicle speeds to approximately 2-5 MPH, making parking lots or light traffic streets safer for pedestrians and motorists. Constructed from 100% recycled rubber tires, Easy Rider® speed bumps are pre-formed to ensure a smooth, safe ride. Its flexible design conforms to the contour of virtually any road surface, and it will not chip, crack, fade, crumble, rot or deteriorate. Channeled bottom helps facilitate drainage as well as cover cabling or piping.

This 6 ft speed bump — 12 in W x 72 in L x 2.25 in H — has a maximum weight capacity of 40,000 lbs. Its brittleness factors in at -40F without change. Weathering up to 70 hours and at 150 F with no minimal change in hardness, compressive strength, tensile strength, and elongation retainment.

Product Summary

Reduces speed to 2-5 MPH
Molded highway reflective tape and "Cats Eye" Reflectors makes curb highly visible at night
Modular design covers the width of any roadway and conforms to uneven surfaces and gravel
Resistant to damage from ultraviolet light, precipitation, oil/gas runoff, road salt, and extreme weather swings
Made with corrosion resistant recycled rubber for long lasting durability
Dimensions: 12 in W x 72 in L x 2.2 in H

_g_n_gnrs3500yb_sr-speed-hump-app-12 (1).jpg

Safety Rider Speed Bump

Product Information

Safety Rider® speed hump is a unique modular device designed to slow traffic to 10-15 mph (approximation) while maintaining a continuous traffic flow. Unlike asphalt or concrete, our speed humps are preformed to provide a uniform, consistent profile, and a smooth, safe ride. Constructed from 100% recycled tires, the interlocking tongue and groove system allows the sections to be linked together to cover the width of any roadway. The Safety Rider® is lightweight, simple to install, and does not require any road closures for installation. End caps are also available to provide a safe and protective finish to the ends of the hump. Ideal for slowing traffic in school parking lots, crossings, playground areas, hospitals, parking facilities, and anywhere slow traffic flow is required. The device can be easily removed for storage or relocation.

Product Summary

Made with corrosion resistant recycled rubber for long lasting durability and dependability
Built to withstand abuse from ultraviolet light and precipitation including ice, road salt, gas and oil and does not change with extreme weather swings
The modular interlocking tongue and groove system, creates a uniform surface fit any road width's
High-impact, high traction recycled rubber won't break, chip, crack, or fade
Molded reflective tape on the mid-sections provide optimal visibility, even on a dark night and in bad weather, alerting drivers well in advance
Long lasting and cost efficient
End caps are available to provide a smooth finish to the ends of the hump and for protecting section ends from wear and tear
Emergency-vehicle friendly. Heavy load bearing. Tensile strength minimum of 500 psi

Wall Guards

Product Information

Wall Guards are cost efficient damage prevention solutions that help protect the surrounding infrastructure and vehicles in parking facilities. Manufactured from high-impact virgin rubber, these long-lasting, durable, and cost-effective solutions are highly visible and easy-to-install. High intensity reflective tape increases visibility – especially at night and provides the necessary guidance to drivers when parking in tight spots. Ideal for surface and multi-level parking lots, interior factory, warehouse walls, and areas surrounding loading docks.

Product Summary

Heavy-duty, one piece construction to withstand all weather conditions
Constructed from high impact thick resistance natural rubber that flexible and absorbs the force of impact and gently bounces back
Features reflective yellow safety stripes designed to bring attention to corners from a distance or in dimly lit areas
Used indoors or outdoors for medium and heavy traffic areas. For temporary or permanent installation. Easily installed by one person
Wall Guards can be mounted vertically or horizontally along walls or beams to prevent damage
Long lasting and cost efficient
Requires minimal maintenance. Periodically inspect the screws and tighten if necessary

Rounded Corner Guard

Product Information

Corner guards are cost efficient damage prevention solutions that help protect the surrounding infrastructure and vehicles in parking facilities. Manufactured from high-impact virgin rubber, these long-lasting, durable, and cost-effective solutions are highly visible and easy-to-install. High intensity reflective tape increases visibility – especially at night, and provides the necessary guidance to drivers when parking in tight spots. Ideal for surface and multi-level parking lots, interior factory, warehouse walls, and areas surrounding loading docks. Available in 2 models.

Product Summary

Heavy-duty, one piece construction to withstand all weather conditions
Constructed from high impact thick resistance natural rubber that flexible and absorbs the force of impact and gently bounces back
Features reflective yellow safety stripes designed to bring attention to corners from a distance or in dimly lite areas
Used indoors or outdoors for medium and heavy traffic areas. For temporary or permanent installation. Easily installed by one person
Corner Guards can be mounted vertically or horizontally along the corners of walls or beams to prevent damage
Long lasting and cost efficient
Requires minimal maintenance. Periodically inspect the screws and tighten if necessary

Flat Corner Guard

Product Information

Back to Products

3670 NW 79th Street | Miami, FL 33147 | (305) 691-7711 | info@anchormiami.com

Anchor Fence Wholesale

Product Information

Product Information

Product Information

Product Information

Product Information

Product Summary

Product Information